• 2:43

Get the most out of your signage.

MAGNETIC VEHICLE SIGNS

Application:  Magnetic sheeting holds best on flat or evenly curved surfaces.  If your magnetic sign is positioned incorrectly, remove the sign & re-align it.  Do not pull the sign.  Doing so may stretch it or scratch your vehicle due to the high magnetic strength of the product.  Ensure your sign fits snugly against the metal surface and eliminate air pockets or leading edges caused by door handles, locks or protective trims.


Cleaning:  As some moisture & dirt will collect between the metal surface & your sign, it is very important to remove it and clean the UV coated rear of your sign & the metal surface with a mild detergent at least weekly, ensuring both surfaces are completley dry before re installing the magnetic sign.

CautionDO NOT expose the UV coating on the rear of your magnet to scratches, fume vapours of solvents, airborne contaminants or extreme heat. DO NOT install on horizontal surfaces such as bonnets or roofs of vehicles or surfaces that are exposed to extreme heat. DAMAGE may result to your sign or the metal surface.  Ensure painted surfaces are fully cured (approx 90 days) & are COMPLETLEY DRY before applying your magnetic sign.  DO NOT FOLD

FAILING TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERMANENT ADHESION OF THE MAGNETIC SIGN TO THE METAL SURFACE.  SIGN AND VISUAL SOLUTIONS TAKES NO RESPONSIBILITY IF THIS OCCURS.

IF FOLLOWED CORRECTLY YOU CAN BE ASSURED OF A TOP PERFORMING PRODUCT